Monthly Archives: June 2018

3 Signs You Have Bed Bug Problems

3 Signs You Have Bed Bug Problems

Bed bugs make an amazing comeback in the United States. To date, the number has decreased significantly and is considered successful. However, these tiny pests have begun to spread again and become much more common, especially in places like hotels. Getting rid of it can be a difficult task because they are really good at hiding and can withstand traditional methods of destruction. Here at St. Louis, the thermal sleep bug treatments are becoming much more common due to the effectiveness and shortage of their chemicals. Let’s look at some signs that you may have bed bug infestations. 3 Signs You Have Bed Bug Problems

Bites – The most obvious sign of bed bugs is finding insect bites on your skin. They prefer exposed skin and often leave many bites in groups or jagged lines. The bites will usually be red and itchy.
Discomfort during sleep – Bed bugs do not always wait until you fall asleep to start partying with your blood, so if you feel buggy and uncomfortable, it could be bed bugs coming for dinner.
Proof on your bed – Check your sheets carefully, bed bugs will leave a small rust-colored stain on your bedspread. As they grow, they will also release their exoskeleton, which will provide definite proof of a problem. 3 Signs You Have Bed Bug Problems

 

Bed bugs are an uncomfortable problem that can be difficult to get rid of. They are very good at hiding in small cracks and crevices, often making traditional pesticides difficult for them. A better and safer alternative to consider is the thermal sleep bed bug at your home in St. Louis. Louis. A professional exterminator can heat your room to the point where bed bugs, their larvae, and eggs can not survive. Once they are eliminated, you can feel safe using your room again without worrying about toxic chemicals while you sleep.

The Darien Gap — A Desperate Journey

The Darien Gap — A Desperate Journey

A 60-mile stretch of virgin jungle forms the border between Colombia and Panama. It’s the only break in more than 19,000 miles of highway that connects the Arctic Ocean and the southern tip of South America.

It’s called the Darien Gap – and it’s a fabled, legendary no-man’s land that’s bedeviled the most storied adventurers, members of the American military, and legions of would-be migrants. But it doesn’t put them off. Even today, tens of thousands of migrants a year risk their lives to cross it.

When the CBSN Originals team set out to cross the gap, we meet Shahab Shahbazi. He’s from Iran, thousands of miles from home, sitting in a smuggler’s home in the middle of nowhere, Colombia.

“I’m trying to find a life,” he tells us. “I’m trying to find out if I can have a better life or not.”

Shahab has a small bag with him, and no more clothes than those he already wears. Like many of the migrants we’ll meet, he seems hideously under-prepared for a week-long, life-threatening trek.

“But… I got to go. I need life. I need more life,” he says.

Migrants can arrive at the southern fringe of the jungle with relative ease, due to lax immigration policies in a number of South American countries. Under the cover of the jungle, they cross illegally from South into Central America. Some will pay smugglers — often known as “coyotes” — a few hundreds dollars to guide them through this notoriously difficult no-man’s land. Other options are far easier — like taking a boat or plane into Central America right up to the doorstep of the U.S. But they heighten the risk of capture and immediate deportation, a crushing setback for migrants when every step on the journey often means starting afresh from nothing.

This particular step comes with its own unique risks. Augustin, one of the smugglers we follow, says “The Darien Gap is… very dangerous. Because there are many hills, many rivers… many snakes, many jaguars. I’ve seen many people die. Not just one. Many.” Added to that, there are violent paramilitary groups who control the drug smuggling corridor that runs parallel, but deeper inside the jungle.

The sheer physical ardour of the trek, however, is the biggest challenge, as we find. Usually within 30 minutes of setting out, we’ve waded through waist-deep waters, soaking our socks for the remainder of the day. Our wet, shriveled and blistered feet are impossibly painful. Most people on the route don’t have a change of clothes.

“I don’t have anything else,” says Shahab. “One pair of pants,” he says of his belongings.

Shahab, who fled Iran due to religious persecution CBS NEWS
The daily diet is just as meagre. It’s rice, all day, with maybe a 1/4 of a can of tuna. It’s bland, but it provides the calories we need to forge ahead, and it’s relatively light.

At the end of a long day, we pepper Shahab with questions about his motivations. He speaks better Spanish than English, having spent years in Venezuela after fleeing Iran.

I ask Shahab, “What do you want to do when you get to the US? If you get to the US?”

“My professional trade is carpentry. I think I want to keep being a carpenter. If not, I’ll be a chef. I’m going to see what I can find in the US.”

He tells me about what he left behind. A family who doesn’t know he’s here in the Darien and a girlfriend in Venezuela.

“She’s my love. She’s my heart. I always think fondly of her. I miss her. And I think about where and when I can see her again.”

The next morning, we pack up camp. Our guides tell us today will be hell. There’s a steep ascent ahead — perhaps the hardest part of the journey. And they warn that we have far too much baggage.

We’ve packed for a long journey — three cameras and enough batteries to allow us to operate them for two weeks. Memory cards, backup drives to seal and secure our memories, sat phones and food. It’s too much to carry, so out go “non-essentials” like toilet paper, ‘extra’ underwear, hand sanitizer.

As I jettison weight, a group of eight migrants catches up with us — from halfway around the world, mostly India and Sri Lanka. Because of a deportation agreement between Panama and Latin American nations, the route is far less palatable to would-be migrants from those countries now. But the route is still plied daily by migrants from much farther afield who see it as a doorway to North America. Augustin, the smuggler, had told us: “Cubans, Haitians, Nepalese, Dominicans, from India, and yes, from Africa too. I calculate that I helped about 2,000. I guided them through and gave them help. Last year, they doubled in numbers.”

Finally, we summit the mountain that’s essentially the demarcation line between Panama and Colombia.

Pros and Cons of

Pros and Cons of

Pros and Cons of PPL Program “SuperStar Cash”.
Pay Per Lead, the lead acquisition method of collecting leads or building e-mail lists is not very common, and the “Cash SuperStar” PPL program is one of the better programs. Depending on the model of agreement between the two parties, it is very beneficial for both PPL program owners and key implementing entities. In such an agreement, advertisers pay only for the prospects submitted if they meet the agreed terms, otherwise no payment is made. (https://en.wikipedia.org/wiki/Cost_per_action) Main Product Benefits

Pros and Cons of

Making money online can be very challenging and requires fairly decent knowledge about website development, traffic generation, site platforms, and all the ins and outs associated with internet marketing. There are many e-book, video and text courses available on the internet to teach you, but this method usually takes months to start making money online. Looking for something you can get quickly quickly? Then do not look further than Pay Per Lead (PPL) market. Pay Per Lead Method

There are not many good and honest PPL programs, but now I use James Jordan’s “Cash SuperStar” program for several years, and he never fails to pay on time, twice as much if your balance is more than $ 15. 3 large (compared to $ 0.50 to $ 0.75) per dual opt-in lead.

The beauty of this is you do not need a website to make money on a regular basis. All you need is to drive one level (T1) traffic to this website, and for every opt-in you get and receive, you’ll receive $ 3.

Tier One traffic is traffic from major English-speaking countries such as the United States, United Kingdom, Australia and New Zealand. Pros and Cons of

James Jordan is a very famous and respected name on the internet and he has been running this program now for many years. This is an easy way to make money on a regular basis and traffic can be generated in many ways such as solo ads, article marketing, etc. Who is the best for this?

Almost anyone can use this program. The only limitation he places on his instructions is that they have to choose double and become T1 traffic.

However, as in every part of life, there is a weakness in this; That’s because he only accepts double opt-in traffic, which can be a bit more difficult to produce. How to be part of this amazing program?

Simply register a free affiliate account with James at Pros and Cons of

url: http: //34.gs/amazin

and start driving traffic to your “CashSuperStar” affiliate website. Rating

Because it is a bit more challenging to generate double opt-in traffic,

I WILL GIVE THIS PROGRAM FOUR-AND-A-HALF STARS.

Your friend in need. James v.Heerden

P.S. I have been using this program now for more than two years and never missed a payment.

Here’s the link to your affiliate again:

Gas Lights: Common Problems and What to Do about Them

Gas Lights: Common Problems and What to Do about Them

Gas lights are popular for their appearance, reliance on natural gas, and long-lasting shine. However, like all features of a home or business, gas lights in Canton, GA, are prone to their own sets of problems. These problems can range from obnoxious to fairly serious, especially because of the toxic nature of natural gas. Here are a few problems that may occur and how professional gas services can repair them for you.

The Basics

 

First of all, you should know a few basics about gas light operation. Primarily, gas lights require fuel and air in order to emit light. If any problems interfere with the process, then the light will either be dim or non-operational.

Dirty Generator

The generator for the gas light may clog after a long period of use. If it clogs for any reason, then some of the fuel vapor being emitted toward the mantle will be limited. Like clogging in arteries, clogging in a generator will prevent the flow of fuel to necessary parts. Professionals may test the generator by adjusting the lantern lever and testing the valve. The generator can be cleaned of any clogs due to dirt, grime, insects, and other miscellaneous matter.

Dirty Fuel and Air Tubes

The fuel and air tubes—often known as F&A tubes in the industry—provide fuel for a lantern, which allows it to emit light. If the lantern sits for long periods of time with unused fuel, then the F&A tube will develop a varnish or even deteriorate, especially if it is made of brass, which is very common. When this happens, the tube will be unable to provide fuel, which means that there is no possibility of the gas light operating. A professional will need to remove the valve and either clean or replace it.

Damaged Gasket

The F&A tube in recent gas light models is usually made of plastic and relies on a gasket and valve in order to operate. The gasket resides between the valve and fuel and air tube. It seals air from escaping from the system and either leaking out toward nearby people or creating a fire hazard elsewhere along the gas light itself. Essentially, it restricts fires from lighting anywhere but in the designated areas. If the gasket cracks, is too tight, or simply ages out of use, then air will leak and, at best, the fire will be weak from a lack of concentrated fuel. Professionals will need to repair or replace the gasket as well as assess the gas lantern itself for any signs of damage.

Though gas lights are beautiful, they rely on natural gas that is poisonous to humans. You should not be concerned about this gas unless your light malfunctions, in which case you should rely on professional gas services for repair services. Professionals can fix gas lights in Canton, GA, quickly and effectively so that you can continue to use them and appreciate their simple beauty for a long time.

5 Strategies to Take Your HVAC Marketing Online

 

Knowing how to utilize internet marketing is quite different than knowing how to fix a home’s air conditioning unit.

Your company may be the best at creating HVAC solutions, but without the HVAC marketing to back it, finding new clients can be a slow process.

However, when you combine marketing deals with exceptional results, the growth opportunities are endless.

Although marketing may not be your expertise, do not shy away from trying it out.

Here are five strategies to use online marketing plans.

1. Run a Competition Analysis
Before you do anything with your online presence, research the way your competition is attempting to stand out.

What keywords does your industry see as the most valuable?

Do local competitors have a strong social media following?

Getting recent, detailed answers to these questions will point you in the right direction for your HVAC marketing strategies.

Remember, if you are just starting to use online marketing, you’re playing catch-up. Discovering your competition’s tactics can help pick up the slack.

2. Always Think About Conversions
Once you’re ready to start picking search keywords and setting up an overall budget, remember to keep conversions as your number one goal.

Prioritizing traffic over conversions is like handing out 100 or 10 flyers and not noticing respond to them. Getting noticed online is great, and traffic can often boost brand recognition, but there is no greater ROI than conversion.

The better you can create a sale, the more efficient your budget is being spent. Over time, this builds more gains for less effort.

3. Focus on Your Content
One of the key ways to achieve good conversion rates is producing new content consistently.

For HVAC marketing, “consistently” means two things – often, and on-brand. You have to produce enough content to stay relevant in the minds of your consumers.

The more aligned your messaging is, the better potential consumers will get to know you. They will become familiar with your brand’s values ​​and personality. Over time, this can mean easily recognizing Kaiser AC over a competitor.

Plus, the information will be more accessible because of consistent content boosts SEO performance.

4. Get Client Testimonials
Another way to boost conversions is building a testimonials page.

This makes your website more trustworthy and approachable. It’s like taking the old-school method of relying on the word of mouth and using it in today’s consumer’s way.

Testimonials can be the deal-breaker for consumers who do their research. If your reviews are easy to find and relatable, there is a chance of someone choosing you over a competitor who does not utilize testimonials.

5. Consult the Professionals
This is the most important tip on our list.

At the end of the day, everyone has a specialty, and it’s not expected for HVAC marketing to be a common skill. However, contacting a content marketing group is like getting insurance on your online efforts.

It connects you to a team of professionals ready to boost your business and build conversions. HVAC services possible, while you focus on providing the best HVAC services possible.

Boost Your HVAC Marketing Approach
When individuals can focus on their specialties, everyone wins.

How I Became An Expert on Lawyers

Benefits You Get From Hiring The Right Personal Injury Attorney

It is important to learn more about personal injury attorneys and what they can do for you as a victim of an accident that you did not cause; click here for more information. People who have been into accidents and getting injured in the process can call a personal injury attorney and ask him or her to help hi get the compensation he deserves from the whole event. Hiring the best personal injury attorney is going to be the best way you can get more benefits from the case plus you will be guided accordingly; this is why hiring the best personal injury attorney is going to be very essential. You have to know that finding a personal injury attorney is not going to be that easy since you still have to get more info about the attorneys that are on your list and determine which is going to be of most help. There are a lot of personal injury attorneys right now which makes it harder for you to find the right one. Also, you should know that not all personal injury attorneys will have the same rates, they will base it with the particular status of their case as well as the severity of the wounds. The initial conversation with a personal injury attorney is not going to cost you anything though.

You need to understand that personal injury attorneys will mostly reject any payment until the compensation has not yet been paid to you, the client. A personal injury attorney will mostly handle the case depending on how the opposing party’s agreements. You need to know that the basis for the agreement will depend on the two but most of the time the attorney will get a percentage of the recompense that his or her client attained. You should know that if you lose the case, you do not have to pay the personal injury attorney anything. Make sure you know how to distinguish a professional’s fee and the cost of hiring a professional. Cost is going to be the expenses that you spent overall including the filing of a lawsuit.

If you want to know more about personal injury and how you can get financial support right away, this site is going to be the best place to start your research. You have to understand that the only way you can competently present your complaint on court is to hire a personal injury attorney to represent you in court. Make sure you spend enough time finding the right company that will have the best personal injury lawyer waiting for you; being in court is not going to be easy which is why you need someone you can trust.

Types of Lumber: The Basics

Types of Lumber: The Basics

Are you looking to start up a woodworking hobby? Perhaps you’re doing some investigating before you start planning to build your own home. Here’s an overview of the different types of lumber out there from E.L. Morse Lumber to get you started on the right track.

Softwood and Hardwood Types of Lumber: The Basics

Different types of trees produce different softness or hardness in the lumber made from them. Coniferous trees, ones with needles like pines, firs, and spruces, usually have softer wood. They’re soft enough to splinter and break from a person’s bare hands, and have to be specially treated over time. It’s interesting that these rough-on-the-outside trees produce softwood lumber, while trees like maple and mahogany produce more stiff, resilient hardwood lumber. Hardwood trees take longer to grow, which is one of the reasons why the wood is so much more expensive.

Classifications of Lumber Types of Lumber: The Basics

All it takes is a glance out your backdoor to see that trees don’t all look the same, even when they’re the same type of tree. So it is with lumber. Not all pine trees will produce the same kind of lumber, which is why they are classified for different uses depending on their characteristics.

Yard Lumber

Yard lumber is one use of softwood, and it’s used in regular construction projects. Depending on the quality, yard lumber comes in different grades: common and select. There’s a no. 3 common, a no. 2 common, and a no. 1 common, 1 being the highest quality grade of common lumber. This highest grade will have a few small, tight knots in it. No. 2 has larger knots and works well in paneling or making shelves. No. 3 has the biggest knots, and does better in fencing or making crates. Select yard lumber has very few to no knots in it at all. The fewer defects in the wood, the higher the select yard lumber grade.

Structural Lumber

Then you have structural lumber. This type of lumber is what a standard 2×4 or 4×4 is made of. It’s typically tested to see how well it will stand up to stress, and different stress grades are used for different purposes. Structural lumber is a diverse material that can be used in a wide variety of accent areas throughout a building. Light framing and structural light framing are done with this type of lumber. Structural joists and planks, as well as beams and stringers, are made up of this lumber type as well. Then you have studs, posts and timbers, and appearance framing at the very end of it all to give it a polished look.

Shop Factory Lumber

Then there’s shop factory lumber, the type of wood that isn’t meant for building large structures. This is the kind of lumber you’re looking for to build doors, pencils, ladders, or any other hodgepodge items that require wood to be manufactured.

The kind of lumber you use is directly in correlation with the kind of work you’re doing. If you’re looking for a bid on your next project, it’s a good idea to get a quote from a lumber company such as E.L. Morse Lumber to get an idea of your costs

Almanac: The “Father of Streamlining”

Almanac: The “Father of Streamlining”

And now a page from our “Sunday Morning” Almanac: November 5, 1893, 124 years ago today – Day One for the man called “The Father of Streamlining.”

For that was the day Raymond Loewy was born in Paris.

An award-winning model airplane designer while still a boy, Loewy moved to the United States after World War I, and went to work.

He transformed the railroad locomotive and the Greyhound bus. He designed modern sewing machines and popcorn machines … and filled his home with his own creations.
Book excerpt: Art Garfunkel’s “What Is It All but Luminous”
Comment Share Tweet Stumble Email
In this excerpt from his new memoir, “What Is It All But Luminous: Notes From an Underground Man” (Knopf), singer Art Garfunkel writes of his early fascination with radio, rock ‘n’ roll, and a fellow classmate named Paul Simon .

Watch Rita Braver’s interview with Art Garfunkel on CBS ‘”Sunday Morning” November 5!

KNOPF
On Saturday mornings, in 1953, in Keds sneakers, white on white, I took my basketball to P.S. 164. We played half-court ball, three on three. Or else I listened to Martin Block’s Make-Believe Ballroom on the radio. I loved to chart the top thirty songs. It was the numbers that got me. I kept meticulous lists – when a new singer like Tony Bennett came onto the charts with “Rags to Riches.” I watched the record jump from, say, # 23 to # 14 in a week. The mathematics of the jumps went to my sense of fun. I was commercially aware through the Hit Parade, as well as involved in the music. Johnny Ray’s “Cry,” the Crewcuts’ “Sha-boom,” Roy Hamilton ballads, “Unchained Melody” reached me. Soon the Everly Brothers would take me for The Big Ride.

As I entered Parsons Junior High where the tough kids are, Paul Simon became my one and only friend. We saw each other’s uniqueness. We smoked our first cigarettes. We have retreated from all other kids. And we laughed. I opened my school desk one day in 1954 and saw a note from Ira Green to a friend: “Listen to the radio tonight, I have a dedication to you.” I was aware that Alan Freed had taken this subversive music from Cleveland to New York City. He read dedications from teenage lovers before playing “Earth Angel,” “Sincerely.” When he played Little Richard’s “Long Tall Sally,” he left the studio mic open enough to hear him pounding a stack of telephone books to the backbeat. This was no Martin Block.

Maybe I was in the land of payola, of “back alley enterprise” and pill-head disc jockeying, but what I was was that Alan Freed loved us kids to dance, romance, and fall in love, and the music would send us. It sent me for life. It was rhythm and blues. It was black. It was from New Orleans, Chicago, Philadelphia. It was dirty music (read sexual). One night Alan Freed called it “rock ‘n’ roll.” Hip was born for me. Chuck Berry, Jerry Lee Lewis. Bobby Freeman asked, “Do you want dance, squeeze and hug me all through the night?” and you knew she did.

I was captured. So was Paul. We followed WINS radio. Paul bought a guitar. We used my father’s wire recorder, then Paul’s Webcor tape machine. Holding rehearsals in our basements, we were little perfectionists. We put sound on sound (stacking two layers of our singing). With the courage to listen and cringe about how not right it was yet, we are going to record.

We were guitar-based little rockers. Paul had the guitar. We wrote streamlined harmonies whose intervals were thirds, as I learned it from the Andrews Sisters to Don and Phil and floated it over Paul’s chugging hammering-on-guitar technique. It was bluesy, it was rockabilly, it was rock ‘n’ roll. We took “woo-bop-a-loo-chi-ba” from Gene Vincent’s “Be-bop-a-lula.” We stole Buddy Holly’s country flavor (“Oh Boy”), the Everlys’ harmony (“Wake Up Little Susie”). Paul took Elvis’s everything (“Mystery Train”). As Paul drove the rhythm, I brought us into a vocal blend. We were the closest of chums, making out with our girls across the basement floor. We showed each other our versions of masturbation (mine used a hand). “The Girl for Me” was the first song we wrote – innocent, a pathetic “Earth Angel.” In junior high we added Stu Kutcher and Angel and Ida Pellagrini.

All the while, I did a lot of homework, the shy kid’s retreat. My geometry page was a model of perfection. Anything worth doing is worth doing extraordinarily well – why not best in the world?

Excerpted from “What Is It All but Luminous” by Art Garfunkel. Copyright © 2017 by Art Garfunkel. All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Industrial designer Raymond Loewy transformed locomotives, automobiles and household appliances into objects of unparalleled beauty. LIBRARY OF CONGRESS
On the CBS show “Person to Person” in 1956, Loewy described his design philosophy: “I felt it was my duty to try to do whatever I could to introduce a little bea

How To Choose Anti Aging Skin Care Products On the internet

How To Choose Anti Aging Skin Care Products On the internet

Aging is usually a gradual act of natural adjustment beginning in early adulthood. It is absolutely clear that each and all of us will develop old capabilities and expertise with the aging process. Anti aging skin problems, such as wrinkles, sagging skin or age spots can bring many changes to the appearance of one’s skin. Unfortunately, this modification is not admired by some people. Individuals who are obsessed with skin care should try anti aging skincare solutions to reverse the signs of aging. As an alternative to sitting and observing these aging signals, it is actually much better to look for good quality anti-aging items on line. The best quality solutions contain the right amount of material that is expected to cure aging. Skilled solutions have proven to be profitable in realizing the promise they create. Get additional information about Cosmedique Anti-Aging Cream
The on-line industry is flooded with anti aging skincare products, so it’s difficult to determine the right product for some anti aging problems. Each and every item differs from different possible sizes, components, designs and types. One of the main variations includes cost, not all product costs are the same. Depending on the challenges and price range of your skin, you can choose specific items for yourself.

 

The best anti-aging items will not only minimize, but will also eliminate the aging indicators significantly. This item is specially designed to address your exact skin problem and help you strengthen your skin. This may range from basic facial moisturizer every day to intense acne treatments to magical eye creams. This final series of creations can solve all the problems of aging properly and professionally. It will protect and beautify your skin, which is the main concern so far for most people today. It really is out there for every boy and girl so they can protect from these signs early on too early in life.

When determining anti aging skin care merchandise, look for items that contain vitamin B5, vitamin E, manuka honey, along with other natural and chemical ingredients that really help the skin. This component will keep your skin hydrated and make you truly feel protected from this harmful UV rays.

To find an efficient range of anti-aging products, it is actually advisable to look for them on line. It is possible to do a good study either by checking customer testimonials or by analyzing the rank or rank of the brand. Getting on the internet has been considered one of the best techniques due to the fact here you may get the best quality and skilled goods with all the accompanying information. You can also evaluate the cost of special items that then make your decision.

Lessons Learned from Years with Options

The History about Iran’s Nuclear Program

The Iranian nuclear program became the main issue on the international community that follows the disclosure of its two previously unreported nuclear facility back in August 2002. Their two facilities which is the uranium enrichment plant located at Natanz as well as the heavy water reactor based on Arak have possible nuclear weapon applications.

The negotiations that in fact were made in Iran and the Western countries that started in August 2002, which actually failed in creating long-term solutions. Following with the negotiations that were made by the EU-3, which is UK, Germany and France, Iran then agreed later on in suspending all its uranium enrichment activities. Another thing is that the EU-3 acknowledged on its nuclear rights and promised as well to supply Iran with modern technology after this provided sufficient assurance on its international community about the nature of its nuclear program.

The said suspensions on its enrichment activity lasted in June 2005 after the made election of President Mahmoud Ahmadinejad and Iran later on resumed its uranium enrichment and be able to see more here.

For about the same time, EU-3 then offered Iran different benefits as a result of its permanent cessation on its uranium enrichment ad the other activities that are associated with the nuclear weapon applications. As the addition on its unpublished economic and political side, Iras as supposed to be provided with guaranteed supply of nuclear fuel and also an assurance of its non aggression from the EU. This offer however was being rejected by Iran because the nuclear officials considers it very insulting and it is also humiliating.

Both the US and EU made their move to have the International Atomic Energy Agency (IAEA) in referring Iran to the United Nations Security Council on any possible sanctions.

In September 2009, Iran actually informed IAEA on the second uranium enrichment facility that’s still under construction near from the city of Qom. Britain, US and France also issued a joint statement that argues that the disclosure of its recet secret facility is growing a concern regarding the nuclear program of Iran. Iran however claimed it was really not required to inform IAEA regarding the new facilities until six months before Iran’s nuclear fuel is introduced. The IAEA also stated that the delay of Iran submitting the information to the agency does not contribute to the building of confidence.

After its revelation, Iran likewise attended on the negotiations on its representatives from the permanent members of the UNSC and the IAEA. After the talks, the IAEA then provided Iran with draft deals which sees Iran ships on the majority of the low-enriched uranium to Russia about their further enrichment and the fuel returned to Iran for the use of medical research as well as for cancer treatment. Iran also proposed some changes on its draft agreement, which however was rejected by the P5+1 and this deal went to nowhere.